Dynamic oil gearbox

Dynamic oil gearbox has advantages of compact ,small weight ,good seal ,easy installation and repair .etc,which comparing with gearbox.

Motor-inside Electric Roller can be used in dust ,moist,mudy,outdoor and highly explosive sites.Ambient temperature between -10ºC～+40ºC . sea level less 1000meters.Normally ,electric roller should be installed with horizontal.

Our electric roller be designed and produced complys with standard of Ministry of Machinery Industry JB/T7330-2000 .In-side gear construction including planetary gear,helical gear and cycloidal gear. Assembly method has motor-inside,motor-outside,and motor movable.

All electric roller can be covered by rubber or not ,the rubber style has plane shape ,double helical shape and diamond shape. All roller can be with backstop and hydraulic coupling and brake.

Hollow Shaft Mounted Gearbox

Hollow shaft mounted gearbox(hanging gearbox)characteristics are as follow:
1.Uses low-carbon alloyed steel cementation processing completely
2.The gear and gear shaft precision is high
3.The volume small,the torque is big
4.Hollow shaft output or solid shaft output.
Rated power：1.1～193KW
Output torque：180~17000N.m
Input speed：750～1500
Output speed：25～300

F Helical parallel shaft geared motor

F series helical parallel shaft geared motor are compact, light weight, big transmission torque, low cost,

high efficiency, low temperature rise, strong load force, all kinds of structure form. can fit different kinds of mounting condition.

Torque Range：Up to 18,000Nm

Input Power Rating：0.18kW to 200kW

Ratio：3.8 to 13000

Input Configuration：IEC-normalized motor adapter, IEC-normalized motor,solid shaft.

Output Configuration: solid with key, hollow shaft，flange,flange&solid shaft,flange&hollow shaft,hollow shaft with shrink disk.

Mounting solution: flange mounted, foot mounted and torque arm

Mounting position:M1,M2,M3,M4,M5,M6(refer to catalogue page 128)

Shaft mounted gear motor

Hollow shaft mounted gear motor(hanging gearbox)characteristics are as follow:
1.Uses low-carbon alloyed steel cementation processing completely
2.The gear and gear shaft precision is high
3.The volume small,the torque is big
4.Hollow shaft output or solid shaft output.
Rated power：1.1～193KW
Output torque：180~17000N.m
Input speed：750～1500
Output speed：25～300

Helical worm Gearmotors

S series helical worm gearmotors be widely used for metallurgy ,mining, construction material, petrochemical industry ,light textile ,paper marking and general machines . etc.
Torque Range：Up to 5000Nm
Input Power Rating：0.18kW to 22kW
Ratio：9.0 to 14062
Input Configuration：IEC-normalized motor adapter, IEC-normalized motor,solid shaft.
Output Configuration: solid with key, hollow shaft，flange.
Mounting solution: flange mounted, foot mounted

Bevel gearbox

Bevel gearbox is a novel reduction gear. Using optimization, module combination system advanced design idea, has small volume, light weight, big transmission torque, stable starting, transmission ratio grading fine properties, such as can be arbitrarily connected according to user requirements and a variety of installation location choice.

Helical bevel gear unit

The helical bevel gear unit is designed for mining conveyor, paper mill, extruder, continuous casting machine or port crane. They must be able to provide a high degree of operational reliability in conditions of high temperature, humidity, dust and other harsh conditions, as well as low speeds and heavy loads. The challenge is to provide cost-effective and modular production while enhancing performance.