The primary feature of the Torkdrive Helical Worm Geared Motors

The primary feature of the Torkdrive Helical Worm Geared Motors high-efficiency series is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high gear ratios of 216:1 or 336:1 make this gearmotors appropriate for small walking robots, lifting mechanisms, and other applications where high torque is desired. Motor overheating can be caused by excessive stalling, even at very low voltages. We recommend that you use stall-detection sensors, or just watch your robot, to make sure that it doesn’t stall for more than a few seconds at a time.

All Torkdrive Helical Worm Geared Motors with the best value

All Torkdrive Helical Worm Geared Motors are manufactured from phosphorous bronze. Our design also incorporates a hardened, ground and polished alloy steel worm. This combination develops a smooth, work-hardened mating surface of the bronze gear which improves with prolonged service.
For almost 100 years, Torkdrive helical worm gearbox has strived to provide customers with the best value and reliability in industrial products. To be considered by customers as the best... Torkdrive products are available at more locations than any other brand.

maximum rigidity of Torkdrive Helical Worm Geared Motors

Torkdrive Helical Worm Geared Motors provide maximum rigidity and strength which allows the transmission of higher horsepower levels than are possible with standard cast iron units. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring proper meshing of the gear under all load conditions. In smaller sizes, fabricated steel reducers are interchangeable with standard cast iron reducers. If your application involves severe shock loads or possible housing damage from external sources (as in steel mills or mobile equipment applications) helical worm gearbox can provide fabricated steel housings with up to a 48" center distances.

a high capacity Helical Worm Geared Motors

Torkdrive Helical Worm Geared Motors have been the work horse in the Power Transmission Solutions family of worm gear reducers for many years. helical worm gearbox to provide for a high capacity product, these products are constructed of the following components:

• Rugged cast iron housings
• Precision gears
• High performance bearings
• Large shafts

feature top quality of the Torkdrive Helical Worm Geared Motors

reducer line of the Torkdrive Helical Worm Geared Motors is a true heavy duty workhorse that handles the environmental assaults, shock loading, frequent reversing and continuous duty cycles typical in many industrial applications. Designed to be the premium worm reducer in the industry, the helical worm gearbox feature top quality features, including:
Extra large lubricant reservoir filled with premium, high-temperature synthetic lubricant.
One-piece, precision finished worms for higher efficiency and long-life operation.
Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.

a new product of Torkdrive Helical Worm Geared Motors

Torkdrive Helical Worm Geared Motors, The need to provide geared motors suitable for use in wet and corrosive environments
has led Motovario to design a new product range specific to these fields.

These Helical worm Gearmotor use materials, surface treatments, components and mechanical process for the motor and gearbox to increase both resistance and reliability.

high-endurance Helical bevel gear motor

Helical bevel gear motor provide a high degree of efficiency of over 90% in both torque directions and at all input speeds. With performance designed to last – high-endurance gearing enables high-torque, wear-free operation. With our remarkably efficient helical bevel gear unit, you have energy-efficient angular gear drives at your fingertips. As they also have a long maintenance-free service life, they can be used in every application with AC asynchronous motors, asynchronous and synchronous servomotors.